Аналізатор спектру частот TinySA Ultra, 0.1 MHz – 5.3 GHz

TinySA Ultra Frequency Spectrum Analyzer, 0.1 MHz - 5.3 GHz

Description:

The TinySA Ultra Frequency Spectrum Analyzer is a compact and powerful device for analyzing frequencies over a wide range. It provides accurate measurements and visualization of the frequency spectrum, making it an ideal choice for engineers, technicians and amateur radio enthusiasts.

Spectrum Analyzer Features:

• Frequency Range: 100 kHz to 800 MHz in Normal Mode and up to 5.3 GHz in Ultra Mode
• Input Impedance: 50 Ω (when attenuator is set to 10 dB or greater)
• Attenuator: Adjustable manual or automatic input signal attenuator with a range of 0 to 31 dB in 1 dB steps
• Maximum Input Level: +10 dBm with attenuator off
• Maximum Short-Term Level: +20 dBm with attenuator on 30 dBm
• Recommended maximum input power: +5 dBm with attenuator in auto mode
• 1 dB compression point: -1 dBm with attenuator off
• Power detector resolution: 0.5 dB (linearity depending on frequency +/- 2 dB)
• Absolute accuracy of the power detector after calibration: +/- 2 dB
• Built-in RF amplifier: 20 dB LNA with 5 dB noise floor
• Least noticeable signal without LNA: -102 dBm at 30 MHz with a resolution bandwidth of 30 kHz
• Least noticeable signal with LNA: -145 dBm at 30 MHz with 200 Hz resolution bandwidth
• Phase Noise: -90 dB/Hz at 100 kHz offset and -120 dB/Hz at 1 MHz offset
• Dynamic Range: 70 dB at 30 kHz resolution bandwidth
• Resolution Filters: 0.2, 1, 3, 10, 30, 100, 300, 600, and 850 kHz
• Scan Resolution: 51, 101, 145, 290, or 450 points
• Scan Rate: > 1000 points per second
• Output on headphones: to listen to the demodulated signal

Characteristics of the signal generator:

• Signal: Sine wave with harmonics less than -40 dB from 100 kHz to 800 MHz
• Output signal level: in 1 dB steps from -113 dBm to -18 dBm
• Output level accuracy: +/- 2 dB up to 800 MHz from -72 dBm to -18 dBm, less accuracy below -72 dBm, even less accuracy below -110 dBm
• Frequency range: from 44 Hz to 800 MHz
• Modulation: Separate modulating signal settings for AM and FM from 50 Hz to 5 kHz (AM) or 1 kHz (FM), or GFC mode in the selected range
• AM Modulation Depth: 10% to 100%
• FM Frequency Deviation: 1 kHz to 300 kHz
• Calibration Generator: square wave generator with an output level of -35.6 dBm. Connects to the CAL output. Frequencies are fixed at 1 MHz, 2 MHz, 4 MHz, 10 MHz, 15 MHz or 30 MHz

Other Specifications:

• Display: 4″ resistive color touch screen
• Memory: MicroSD memory card slot
• Power: Built-in 3000 mAh battery. Charging via USB Type-C connector
• Case material: Plastic
• Dimensions: 11.5 x 7.2 x 2.3 cm
• Kit weight: 360 g

Package contents:

• TinySA Ultra vector analyzer
• Telescopic SMA antenna
• Two SMA cables
• USB Type-C cable

The TinySA Ultra frequency spectrum analyzer is a reliable and accurate tool that will become indispensable for working with radio frequency signals.

from 10% to 100%

FM frequency deviation: from 1 kHz to 300 kHz

Calibration generator: a square wave generator with an output level of -35.6 dBm. Connects to the CAL output. Frequencies are fixed at 1 MHz, 2 MHz, 4 MHz, 10 MHz, 15 MHz or 30 MHz

Other characteristics:

• Display: 4″ resistive color touch screen
• Memory: MicroSD memory card slot
• Power: Built-in 3000 mAh battery. Charging via USB Type-C connector
• Case material: Plastic
• Dimensions: 11.5 x 7.2 x 2.3 cm
• Kit weight: 360 g

Package contents:

• TinySA Ultra vector analyzer
• Telescopic SMA antenna
• Two SMA cables
• USB Type-C cable

The TinySA Ultra frequency spectrum analyzer is a reliable and accurate tool that will become indispensable for working with radio frequency signals.

from 10% to 100%

FM frequency deviation: from 1 kHz to 300 kHz

Calibration generator: a square wave generator with an output level of -35.6 dBm. Connects to the CAL output. Frequencies are fixed at 1 MHz, 2 MHz, 4 MHz, 10 MHz, 15 MHz or 30 MHz

Other characteristics:

• Display: 4″ resistive color touch screen
• Memory: MicroSD memory card slot
• Power: Built-in 3000 mAh battery. Charging via USB Type-C connector
• Case material: Plastic
• Dimensions: 11.5 x 7.2 x 2.3 cm
• Kit weight: 360 g

Package contents:

• TinySA Ultra vector analyzer
• Telescopic SMA antenna
• Two SMA cables
• USB Type-C cable

The TinySA Ultra frequency spectrum analyzer is a reliable and accurate tool that will become indispensable for working with radio frequency signals.