Argus Pro FC Flight Stack: ECO F722, ESC: 80A 8S, BLheli32

Flight stack ECO F722 + Argus Pro 80A - a high-performance stack that combines the ECO F722 flight controller and the Argus Pro 80A 4-in-1 speed controller. The kit is designed for powerful FPV systems with high power consumption and is aimed at large, long-range and heavy drones, including platforms with propellers up to 15 inches.

The flight controller is built on a high-performance microcontroller STM32F722 and is equipped with a modern gyroscope ICM42688P, which provides fast and accurate determination of the drone's position and movement. The controller has 5 UARTs, a built-in barometer, OSD and 16 MB of Blackbox memory for recording and further analysis of flight data.

The built-in BEC outputs 5V/3A and 12V/2A allow you to power the receiver, video transmitter and other peripherals without the need to install additional power converters.

The Argus Pro 80A regulator supports 4-8S LiPo batteries and provides up to 80 A continuous current per channel with a peak load of up to 90 A. This allows the stack to be used in powerful FPV builds with large motors and high current consumption.

The ESC is available in 8-bit version with Bluejay or 32-bit version with BLHeli32. The 32-bit version additionally supports ESC telemetry. Aluminum heat sinks contribute to effective cooling and stable operation of the electronics under continuous high load.

The standard mounting pattern 30.5×30.5 mm simplifies the installation of the stack into compatible FPV frames.

Technical specifications:

ECO F722 Flight Controller

• Model: ECO F722
• Firmware / Target: SPEDIX F722
• Microcontroller (MCU): STM32F722
• Gyroscope: ICM42688P
• Barometer: supported
• Blackbox: 16 MB
• Input voltage: 4–8S
• BEC 5V: 5V / 3A
• BEC 12V: 12V / 2A
• UART: 5
• OSD: supported
• Dimensions: 36×36×6 mm
• Mounting holes: 30.5×30.5 mm
• Weight: 7 g

ESC Argus Pro 80A

• Model: Argus Pro 80A
• Type: 4-in-1 ESC
• Versions: 8-bit / 32-bit
• Firmware 8-bit: B-X-40 / Bluejay 32-bit firmware: BLHeli32 Input voltage: 4–8S LiPo Continuous current: 80A Peak current: 90A Current sensor (Ammeter): 200A Overheat protection: Supported Telemetry: Supported in 32-bit version 8-bit telemetry: Not supported BEC: None Dimensions: 57×56×7 mm Mounting holes: 30.5×30.5 mm
• Weight: 41±2 g

Advantages

• Support 4-8S LiPo  - suitable for powerful high-voltage FPV assemblies.
• 80 A continuous current  - significant power reserve for large motors and propellers.
• STM32F722  - high-performance MCU for fast flight data processing.
• ICM42688P gyroscope  - modern high-precision sensor for stable drone control.
• 8-bit or 32-bit ESC - option to choose the version according to the configuration drone.
• Aluminum heat sink - improves ESC cooling under high loads.
• ESC overheating protection - additional protection during long-term operation.
• Blackbox 16 MB - records flight data for diagnostics and tuning.
• 5 UART - sufficient number of interfaces for connecting GPS, receiver, VTX and other equipment.
• Built-in barometer - allows you to receive data on atmospheric pressure and altitude.
• BEC 5V/3A + 12V/2A - powers peripheral equipment without a separate external BEC.
• Standard mounting 30.5×30.5 mm - compatible with a large number of FPV frames.
• Focused on heavy FPV drones - the manufacturer recommends the stack for large platforms, particularly 15-inch ones.

Recommended use

The stack is suitable for:

• 13-15-inch FPV drones;
• heavy FPV platforms;
• Long Range drons;
• large-sized FPV assemblies;
• drones with powerful engines and high current consumption;
• cinematic FPV platforms;
• systems on 4S, 6S and 8S LiPo batteries.

Complete set

• M3×30 screws - 4 pcs
• M3 nylon nuts - 8 pcs
• Anti-vibration dampers - 8 pcs
• XT90 power cable - 1 pc
• Analog camera connection cable - 1 pc
• FC ↔ ESC connection cable - 1 pc
• HD VTX connection cable - 1 pc
• Receiver cable - 1 pc
• Cases connectors - 2 pcs.

Important

BEC is located on the ECO F722 flight controller, not on the ESC.

ECO F722:

• 5V / 3A - available;
• 12V / 2A - available.

Argus Pro 80A ESC:

• BEC - absent.

Also, you should consider the difference between ESC versions:

8-bit:

• Bluejay;
• ESC telemetry is not supported.

32-bit:

• BLHeli32;
• ESC telemetry is supported.

Before assembly, it is recommended to check the maximum current motors, battery parameters, power wire cross-section and compatibility of all components with the selected number of LiPo cells.