SP5035 intelligent control turntable

Overall dimensions:

Description: 

• Maximum load: 35 kg
• A high-precision, high-strength worm gear is used, which automatically locked when power is turned off
• High positioning accuracy: up to ±0.1°
• Protection class: MAX IP66
• The housing is made of high-strength die-cast aluminum alloy, resistant to extreme environmental conditions

Technical specifications:

• Rotation speed:  
• • horizontal – 0.01°~30°/s
  • tilt – 0.01°~12°/s
• Rotation angle: 
• • Horizontal: 0°~360° continuous
  • Tilt: +45° ~ -45°
• Presets: 200 (range: 1 ~ 80, 131 ~ 250)
• Preset accuracy: ±0.1°
• Return to home position: optional
• Auto patrol: 8 routes, up to 10 points on each route
• Auto return: configurable from 1 to 60 minutes
• Auto scan: 1 cycle
• Control protocols: Pelco-D / Pelco-P (optional)
• Baud rate: 2400 / 4800 / 9600 / 19200 bps (optional)
• Communication interface: RS485 with angle query support (or RS422 with real-time support)
• Network interface:  Optional
• Heating function:  Optional
• Power supply: DC28V ±20%; AC24V ±20%, 50/60Hz
• Power consumption: ≤80W
• Operating temperature: -25℃ ~ +65℃
• Storage temperature: -40℃ ~ +70℃
• Load: 35kg
• Mounting: top mounting
• Protection class: IP66
• Device weight: 23kg
• Dimensions: 349 × 206 × 380mm (L × W × H) ±5mm
• Lens Support:  Supported, automatic adaptation to FUJINON, COMPUTAR, KOWA, etc.
• Lens Control Speed:  Zoom and focus control speed is continuously adjustable
• OSD Menu:  Not supported (optional)
• MTBF (Mean Time Between Failures): ≥ 5000 hours
• MTTR (Mean Time to Repair):  ≤ 30 minutes

OEM options:

• Color: 
• • gray (default)
  • olive green
  • sea gray
  • white 
    
• Driver type:
• •  stepper motor (default)
  •  servo drive 
    
• Interface position:
  • bottom nut (default)
  • base nut
  • base connector
• Installation method: bottom-up mounting (default)

1.  Address Setting

When setting the PT address (Pan/Tilt) using SW1, open the small window on the front of the pan/tilt platform.

* The figure above shows an example of part of the address code. Other addresses are set in a similar way according to the binary system.

2. Baud Rate Setup

The pan/tilt platform supports the following baud rates: 2400 bps, 4800 bps, 9600 bps, 19200 bps. Setting is done using switches SW1-9 and SW1-10: