GPS module HolyBro M10, connector 10 pins

The M10 GPS module is a modern multi-constellation GNSS solution based on u-blox M10, designed for accurate and stable navigation even in difficult flight conditions. Parallel operation with GPS, Galileo, GLONASS and BeiDou provides fast position fixation and confident navigation during high speeds and sharp maneuvers.

The module is equipped with an IST8310 compass, a three-color LED indicator, a built-in buzzer and an emergency button, which makes it fully ready for use in professional drone assemblies. Support for multiple connector types simplifies integration with various flight controllers, and the standard data rate of 115200 baud and 5 Hz refresh rate guarantees stable communication.

The highly sensitive 25 × 25 mm ceramic patch antenna with active amplification provides excellent signal reception and reliable operation in any position of the drone. The presence of a backup power source allows you to perform a warm start and restore satellite fixation faster.

The M10 GPS module has been tested in real tests along with other top models and has proven its ability to work stably on high-speed drones in acro mode, ensuring accurate RTL and reliable operation of autonomous missions.

Technical specifications

• Model: Holybro M10 GPS
• GNSS receiver: u-blox M10
• Number of simultaneously supported GNSS: Up to 4 GNSS, BeiDou, Galileo, GLONASS, GPS, QZSS
• GNSS bands : GPS L1, Galileo E1, GLONASS L1, BeiDou B1, SBAS L1, QZSS L1
• Compass: IST8310
• Data output protocols: UBX (u-blox), NMEA
• Positioning accuracy: 2.0 m CEP
• Navigation data update rate: Up to 25 Hz (single GNSS system), up to 10 Hz (4 simultaneous GNSS systems)
• GNSS differential correction system:  EGNOS, GAGAN, MSAS, WAAS
• QZSS:  L1S
• Standard data exchange rate (baud rate): 115200
• Input voltage: 4.7–5.2 V
• Connector types: JST-GH, 10 pin, JST-GH, 6 pin, Molex 1.25 mm: 6 pin, 4 pin and 3 pin
• Antenna: Ceramic patch antenna 25 × 25 × 4 mm
• Antenna gain: 1.5 dBi
• Antenna LNA gain: 22 dB
• Power consumption: Less than 200 mA at 5 V
• Operating temperature range: −40…+80 °C
• Overall dimensions: Ø50 × 14.4 mm
• Weight: 32 g
• Cable length: 27 cm (42 cm cable supplied separately)

Other

• Tricolor LED (LED)
• Built-in buzzer
• Emergency button (Safety Switch)
• LNA MAX2659ELT + RF amplifier
• Farah rechargeable capacitor
• Low-noise voltage regulator 3.3 V

Scheme pins

SKU12040 — Holybro M10 GPS (JST GHR 1.25 mm cable, 10 pin): - This option is the most common. This connector is used with standard Pixhawk flight controllers and connects to the 10-pin “GPS Module” or “GPS1” port.

Package

• 1× M10 GPS Module
• 1× Fixed Carbon GPS Mount