Wi-Fi signal amplifier EDUP EP-AB007 2.4GHz, 4W (36 dBm), IEEE 802.11b/g/n

The EDUP EP-AB007 Wi-Fi signal amplifier is designed to increase the range and stability of IEEE 802.11b/g/n wireless networks in the 2.4 GHz band. The device works as a bidirectional RF amplifier, automatically amplifying both the transmitted and received signal between the router and the antenna.

With an output power of up to 4 W (36 dBm), the amplifier allows you to significantly increase the coverage area of ​​the wireless network, improve the signal quality in remote areas, and increase the stability of the connection in the presence of interference.

The model supports automatic switching between transmission and reception modes (TX/RX) with a delay of less than 1 μs, which ensures fast and uninterrupted network operation. The device is compatible with most Wi-Fi routers, access points and antennas operating in the 2.4 GHz range.

Technical specifications

• Device type: bidirectional Wi-Fi signal amplifier
• Wi-Fi standards: IEEE 802.11b/g/n
• Operating frequency: 2400-2500 MHz
• Operating mode: TDD
• RF output power: 36 dBm (4 W)
• Input power range: 3-20 dBm
• Transmitter gain (TX Gain): 13 ±1 dB
• Receiver gain (RX Gain): 10 ±1 dB TX/RX switching time: <1 μs Noise ratio: <2.5 dB (typical) Supply voltage: 6–18 V DC Operating temperature: -40°C to +70°C Humidity: up to 95% Antenna interface: RF IN / RF OUT (SMA) Package contents: EDUP EP-AB007 signal amplifier - 1 pc.
• Pigtail RP-SMA Male - SMA Male - 1 pc.
• Power cable - 1 pc.
• User manual - 1 pc.

Connection diagram

1. Disconnect the antenna from the Wi-Fi router or access point.
2. Connect the router to the RF-IN input of the amplifier using a coaxial cable.
3. Connect the antenna to the RF-OUT output of the amplifier.
4. Connect the power supply to the device.

After powering up, the amplifier automatically starts working without additional settings.

Main advantages

• Output power up to 4 W (36 dBm)
• Supports IEEE 802.11b/g/n standards
• Operates in the 2400–2500 MHz range
• Automatic TX/RX switching
• Signal amplification for transmission and reception
• Low noise level
• Easy connection without complicated settings
• Compatible with most Wi-Fi routers
• Can be used with external antennas
• Wide operating range temperatures

Additional information

It is important to note that the actual operating range depends on the power of the router, the type of antenna, the quality of the cable, the presence of obstacles and the characteristics of the terrain. For maximum efficiency, it is recommended to use an external antenna with a gain of 6 dBi or more.